BM / BMX Series

BM / BMX Series

MGM squirrel-cage motors and brakemotors deliver the best performance and reliability combined with low maintenance. Designed for continuous duty also under tough service conditions, these brakemotors are used wherever fast, precise, high cycling, safe low-noise braking combined with compact dimension are the application needs. BM series represent the state of the art in brake motor technology.

Power Range:

0.12 HP to 75 HP

Insulation System
  • Phase insulators

  • Vertical dipping

  • Top stick (wedge)

  • Slot liners

Mounting Configuration
  • Feet Integrated in the frame

  • Foot Mount(B3)/Face Mount (B14)/Flange Mount (B5)

  • NEMA C face

  • Reduced or Increased flange/shaft size available

  • Suitable for mounting in any position

Optional Features
  • Severe duty protection (Wash Down – Marine)

  • 50 Hz for worldwide use

  • Forced cooling for low frequency operation

  • Thermostat or Thermistors (PTC)

  • Classes H insulation

  • Mounted encoder

  • Drain Holes

  • Micro-Switch detector (ON/OFF Brake – Brake wear)

Main Features
  • All motors designed for inverter duty

  • Single Speed / Two Speed

  • Totally Enclosed Fan Cooled (TEFC)

  • Dimensional Standards per IEC (Metric)

  • Flange Coupling per NEMA Standard (Imperial)

  • Continuous duty (BMX)

  • Standard design

  • Manual Brake Release on request

  • DC brake (single ph. with built-in rectifier)

  • Brake Terminals Connected with Motor Terminals or on a Separated Terminal Block

  • Compact or Oversized Conduit Box

  • Pressed-steel fan cover

  • Molded plastic fan

  • Extremely low rotor inertias

  • High-cycling application

  • Hex Hole on NDE for manual shaft rotation with Allen Key

  • cCSAus approved

  • CE Mark for shipment into Europe

  • CCC approval for shipment into China

Insulation System
  • Phase insulators

  • Vertical dipping

  • Top stick (wedge)

  • Slot liners

Mounting Configuration
  • Feet Integrated in the frame

  • Foot Mount(B3)/Face Mount (B14)/Flange Mount (B5)

  • NEMA C face

  • Reduced or Increased flange/shaft size available

  • Suitable for mounting in any position

Optional Features
  • Severe duty protection (Wash Down – Marine)

  • 50 Hz for worldwide use

  • Forced cooling for low frequency operation

  • Thermostat or Thermistors (PTC)

  • Classes H insulation

  • Mounted encoder

  • Drain Holes

  • Micro-Switch detector (ON/OFF Brake – Brake wear)

Main Features
  • All motors designed for inverter duty

  • Single Speed / Two Speed

  • Totally Enclosed Fan Cooled (TEFC)

  • Dimensional Standards per IEC (Metric)

  • Flange Coupling per NEMA Standard (Imperial)

  • Continuous duty (BMX)

  • Standard design

  • Manual Brake Release on request

  • DC brake (single ph. with built-in rectifier)

  • Brake Terminals Connected with Motor Terminals or on a Separated Terminal Block

  • Compact or Oversized Conduit Box

  • Pressed-steel fan cover

  • Molded plastic fan

  • Extremely low rotor inertias

  • High-cycling application

  • Hex Hole on NDE for manual shaft rotation with Allen Key

  • cCSAus approved

  • CE Mark for shipment into Europe

  • CCC approval for shipment into China